If the gravity center fails to stay in level, adjust the gravity centerby sliding around the RolI arm until it regain its leveÍ state, toensure the stabilizer normal operation. When the handle swing to the left or right to closed to the level and hold. For a while, the gimbal will automatically switch to the vertical shooting mode. The use of the extension stick.
Hold the the plastic part under the heading motor by your left hand. Rotate the handle to the left by your right hand, loosen and pull out the extension stick, then rotate the handle to the right to tighten the extension stick at your desire length. The Button for power on/off or ModeMode. Switch function after turn on. Pan-Following Mode: Pitch axis and roll axis are locked, panning is consistent with hand tomove;up/down joystick can change pitch angle.
Full Following Mode: Roll axis is locked, pitch and panning is consistent with hand to move. Locking Mode: Roll/pitch/panning mode all locked;Up/down joystick can change pitch angle, leflrightjoystick can change pan angle.(Fill Light default off while the Gimbal power on). Wheel roll up: Zoom in. Wheel roll down: Zoom out. The Fill light can be rotated 180 for front /rear side to flling light backwardor forward. The current mode of the stabilizer can be identify by the status indicator.
Single Blinking (The default state when turn on): Panning Following Mode. Double Blinking: Full Following mode. Uncharged: Power indiation, long licght is normal working; SIow. Flashing is low battery reminder; Quick flashing is low battery warning.Charging: Blinking is charging, long light is finished charging. If use the Gimbal for the first time or it's under any of following situations , please calibrate. Slight deviation is found at the horizontal angle after the Gimbal power on. Too large temperature difference between operation environments.
A small angle adjustment is found when the Gimbal is in level positionwhile the stabilizer stays still. Calibration Operation Steps as below. First, keep the joystick downward and then power on, the greenIight is long light and the red light sIow flashing, indicating that enter intothe gyroscope calibration mode. Put the gimbal still on a horizontal table surface and single clickthe shooting button.
The indicator light turns green, the red light is quick flashing andkeep the gimbal static for about 10s. If the calibration is successful, the indicator will turn to the greenand it's always on, red light is slow flashing; If the calibration is failed, theindicator will turn off, the red light is quick flashing. After calibration is complete, turn off and restart the gimbal. APP will automatically search for the GimbaI and connect. Hand-held Gimbal V5 x 1.
Manual x 1 Certification x 1. Please check carefully if any of the following items is packaged in the productsbefore using. In case any items is found missing, please contact AFI or your agent.You must tell us what the defect is and give us your order number. The item "Handheld Phone Gimbal Stabilizer for iphone X 8 7 Plus 6S Android Handheld Phone" is in sale since Monday, July 30, 2018. This item is in the category "Cell Phones & Accessories\Cell Phone Accessories\Other Cell Phone Accessories". The seller is "dslrbaby" and is located in Shenzhen, Guangdong. This item can be shipped worldwide.